G.SB Paint Tools Co., Ltd

When decorating, painting is very important. If you want to paint, what are the good steps for everyone to understand?  Custom Pattern Roller Leading Supplier  will introduce the methods in this area today so that everyone can have a better painting step and bring good results. Decoration brush painting steps: Primary treatment of wall painting process Remove the peeling and lose parts of the wall, and makeup with cement mortar. If there are cracks, use kraft paper tape and white latex to stick the cracks. Generally, non-load-bearing walls, such as light-weight walls and thermal insulation walls, need to be covered with cloth. Try to choose a better-quality wall cloth and white latex or grid cloth. The grid cloth will have a better crack prevention effect. Brush interface agent for the wall painting process The interface agent can enhance the adhesion to the base layer, avoid the phenomenon of emptying and shelling of the plaster layer, and thus replace the manual chiseling

Wall knurling detailed construction operation When decorating the wall, using the  Pattern Roller With Handle  for knurling is also very beautiful. The cost of the decoration is not high. In terms of the decoration effect, it is also ideal, but it is necessary to understand the detailed construction of the wall knurling in time. Beautiful wall knurling decoration, relatively speaking, the decoration price is reasonable, but in terms of construction, it also needs to be carefully understood. Wall knurling detailed construction operation The indoor wall paint roller brush can be directly coated with white latex paint, or a color paste can be added to form a colored latex paint, and then applied. After the latex paint is finished, dry (1-2 days) and check the temperature at that time. Then knurling construction. Pattern Roller Place the  Pattern Roller  in an adjustable knurled paint and turn the large roll of material to evenly supply the paint and install the selected pat

The roller brush, also known as the roller, is divided into three types: long hair, medium hair, and short hair. It is a tool for large-area paint roller coating. Use can be coated with a large area of paint There are three types of the roller brush, long hair, medium hair and short hair. Roller brush: Roller brushes are often used in the rolling of large areas of paint for everyday architectural projects; Roller brush introduction: Also known as the roller, it needs to be matched with the roller brush used in the lacquer plate. Because it has a wide rolling surface, it is the most labor-saving and time-saving brush. Especially after connecting the extension rod, it can easily paint the wall height or the ceiling, but the disadvantage It is easy to produce the situation of paint splashing, so the hair of the roller brush should not be too short, but it must be thin, so that the paint film that is brushed out will be delicate; Classification of roller brushes: The rolle

As a  Pattern Roller Manufacturer , I have some information to share with you. Before painting the wall paint, it is necessary to clean the construction area first, if the furniture, electrical appliances, etc. are best moved to other places. If you can't move it, you need to protect the finished product, because, during the construction process, it will inevitably lead to paint falling, which will easily cause pollution and affect the aesthetics of use. Before the official start of construction, a comprehensive inspection of the wall is required to see if the base is firm and flat. If the paint film is peeled off or cracked on the old wall, it is necessary to first shovel the wall or use plaster to repair the crack. The wall surface is free from dust, debris, and flatness, and then the interface agent is used to paint the wall surface, and the construction should be fine and uniform. Then you need to level the wall. This process is usually painted twice, but it needs to be de